Hardware Specifications

Copper Port

12 x 10/100/1000Base-T RJ45 auto-MDI/MDI-X

SFP Port

4 x 1.25/2.5G SFP slots

Port 15-16 supports optional 2.5G, 1.25G, or 100M optical modules

Port 13-14 supports 1.25G or 100M optical modules

Console

1 x RJ45-to-RS232 serial port(115200,8,N,1)

Reset Button

< 5 sec: System Reboot > 5 sec: Factory Default

Connector

5-pin removable terminal block for power input

Pin 1-2 for Power 1,

Pin 3 for GND,

Pin 4-5 for Power 2,

3-pin removable terminal block for fault alarm，

Pin 1-3 for fault alarm

Alarm

One relay output for power failure.

Alarm relay current carry ability:2A @ 24VDC

Enclosure

IP40 aluminum case

Installation

DIN-rail or wall mounting

Dimensions

154mm x 127mm x 54mm (L x W x H)

Weight

1100g

Power Consumption

MAX. 15 watts (Full loading)

Electrostatic Discharge

Contact discharge: ± 8kV Discharge in air: ± 15kV

Surge Protection

Power Supply: ± 4kV RJ45 Port: ± 2kV

LED Indicators

P1(Green), P2(Green), ALM(Red). RUN(Green)

SFP: 1G(Red)，2.5G(Green),

RJ45: 10/100M(Red), 1000M(Green)

Switching Specifications

Switch Architecture

Store-and-forward

Switch Fabric

36 Gbps/non-blocking

Address Table

8K entries, automatic sources address learning and aging

Data Buffer

4Mbits

Jumbo Frame

10K bytes

Flow Control

IEEE 802.3x pause frame for full duplex Back pressure for half duplex

Software Specifications

System Information

Equipment panel graphical overview

Equipment and system information

CPU status information

IPv4, IPv6 interface and routing status information

Support log record

System Management

Support system information configuration

Support system user management and user level management

Support IPv4 and IPv6 management interface configuration and management interface

Support IP Route gateway

Support SNMPv1/v2/v3 protocol, support Web and Telnet access management, and support FR-VIEW

Support LLDP link discovery protocol

Network Clock

Support NTP protocol and network host time synchronization

Support 1588, 802.1AS and on-board AS clock protocol

Support transparent clock, boundary clock, master clock, slave clock and other modes

Layer 2

Management

Support port status, port traffic statistics, port priority status and other details and management control

Support SFP optical module DDM diagnostic information function

Supports port VLAN and VLAN Tag modes, and supports Access, Trunk, and Hybrid modes

Support private PVLAN, voice VLAN and GVRP dynamic VLAN

Support VLAN based on MAC, protocol, IP subnet or stream

Support QoS, DSCP based mapping and SP scheduling algorithms, and credit based algorithms

Support port aggregation function based on static and LACP

Support IGMP snooping multicast, support multicast LAN auto registration MVR function

Support MVRP multi VLAN registration protocol based on MSTI

Ring Network

Redundancy

Support RSTP, MSTP

Support MRP media redundancy protocol

Support ERPSv2 redundancy protocol

Support APS automatic loop switching protocol

Layer 3 Route

Support Static Route

Security

Support SSH and HTTPS based secure WEB configuration access

Support RMON statistics, events and alarms

Support port security and port+VLAN+MAC binding function

Support network access service control, RADIUS, guest VLAN

Support ACL access control list, support access control based on IPv4, IPv6, protocol and port

Static IP source address protection function

Static and dynamic ARP protection function

AAA protection

Device Management

Support SNMPv1/v2/v3 protocol, support Web and Telnet access management

Support LLDP

Support DHCP Snooping and DHCP server management

Support port mirroring

Support “sFlow” flow sampling function

Support configuration of download and upload functions

Network Maintenance

Support CFM connectivity detection function, loopback function and link tracking function

Support Ping and Traceroute diagnosis

Link OAM management

Regulatory

Safety

IEC/EN 62368-1

EMI

EN55032 Class A, CISPR 32 FCC Part 15B Class A

EMS

EN61000-4-2 (ESD) EN61000-4-3 (RS) EN61000-4-4 (EFT) EN61000-4-5 (Surge) EN61000-4-6 (CS) EN61000-4-8 (PFMF

Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Environmental

RoHS

Standards Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3z Gigabit 1000T

IEEE 802.3z Gigabit SX/LX

IEEE 802.3bz 2.5G/5G BASE-X

IEEE 802.3x flow control and back pressure

IEEE 802.3ad port trunk with LACP

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1s Multiple Spanning Tree Protocol

IEEE 802.1p Class of Service

IEEE 802.1Q VLAN tagging

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ah OAM

IEEE 802.1ag Connectivity Fault

Management (CFM)

IEEE 802.1AS Timing and Synchronization for Time-sensitive Application

IEEE 802.1Qbu Frame Preemption

IEEE 802.1Qci Per-Stream Filtering and policing (PSFP)

IEEE 802.1Qbv Enhancements for Scheduled Traffic

IEEE 802.1CB Frame Replication and

Elimination for Reliability (FRER)

RFC 768 UDP

RFC 783 TFTP

RFC 791 IP

RFC 792 ICMP

RFC 2068 HTTP

RFC 1112 IGMP v1

RFC 2236 IGMP v2

RFC 3376 IGMP v3

RFC 2710 MLD v1

RFC 3810 MLD v2

RFC 2328 OSPF v2

RFC 5340 OSPF v3

RFC 2453 RIP v2

ITU-T G.8032 ERPS Ring

Warranty

MTBF

500,000 hours

Defects Liability Period

5-year warranty, lifetime technical support

Safety grade

EN60950-1

Model

Description

UF-PTP412G-SFP

L3 Managed P2P Industrial Ethernet Switch:

12-Port 10/100/1000Base-T + 4-Port 2.5G/1.25G/100Base-X SFP

SFP Options

► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP).

► SFP module is to be purchased separately.

Mounting Options

► Default DIN-Rail Bracket installed; Wall Mount Bracket is included.

Power Options

►DIN-Rail Power Supply. Open Wire for Terminal Block.

► Power Supply is to be purchased separately.