Location:Products > Ethernet Transmission > Power over Ethernet > Industrial PoE Switch > Industrial Managed PoE Switches

L3 Industrial 8-Port 10/100/1000T 802.3bt PoE + 4-Port 1G/10G SFP+ Managed Ethernet Switch

Model:UF-MIES4X8GP90-SFP Series


►    8x10/100/1000Base-T 95W 802.3bt PoE++ ports, 4x1G/10G SFP+ ports

►    Supports PoE power up to 95 watts for each PoE port, total PoE Power Budget up to 480 watts maximum




UF-MIES4X8GP90-SFP Series is an industrial Managed switch with 8-Port 10/100/1000BASE-T 802.3bt PoE++ and 4-Port 1G/10G SFP+. It supports Layer 3 IP routing in a DIN Rail Mount case. With a 4 x 10Gbps uplink, the UF-MIES4X8GP90-SFP allows operators to deal with many thousands of data in a secure topology connected to industrial backbones or high-capacity servers. Modernizing the industrial LAN dramatically allows it to meet ever-increasing bandwidth demands. With dual power input design, UF-MIES4X8GP90-SFP can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 80°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments.



Industrial Managed 95W PoE Switches, Managed Industrial PoE Switches, L2/L3 95W PoE Switch - Industrial Grade, Managed 8 Port Industrial PoE Switch, L3 Industrial 8-Port 10/100/1000T 802.3bt PoE + 4-Port 1G/10G SFP+ Managed Ethernet Switch, Managed Industrial PoE Switch with 8-Port 10/100/1000T 802.3bt PoE + 4-Port 1G/10G SFP+

►    8x10/100/1000Base-T 95W 802.3bt PoE++ ports, 4x1G/10G SFP+ ports

►    Supports PoE power up to 95 watts for each PoE port, total PoE Power Budget up to 480 watts maximum

►    Layer 3 Model support OSPFv2, RIPv2, Static Route

►    Support both IPv4/IPv6 applications

►    LLDP, LLDP-MED protocol suitable for IIoT Applications

►    Support IEEE802.3az energy efficient Ethernet technology, 8K MAC address table

►    Electric 8KV surge protection

►    Power input polarity protection design, no worry about wrong operation

►    Aluminum case, no fan design

►    Installation method: DIN Rail/Wall mounting



Ethernet Interface

Model

UF-MIES4X8GP90-SFP

Ports

4×1G/10G SFP+
8×10/100/1000M Base-TX

Port Mode (Tx)

Auto-Negotiation
Full/Half Duplex Mode
Auto MDI/MDI-X Connection

Standards

IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3ae for 10 Gigabit Ethernet
IEEE 802.3x for flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.3ad for Port Trunk with LACP

Packet Buffer Size

12Mbits

Maximum Packet Length

Up to 10K

MAC Address Table

16K

Transmission Mode

Store and Forward (full/half duplex mode)

Exchange Property

Delay time: < 7μs
Backplane bandwidth: 128Gbps

IGMP Group

4096

Max. No. of VLAN

256

VLAN ID Range

VID 1 to 4094

Power over Ethernet

PoE Standard

8 x IEEE 802.3af/at/bt PoE++

Power budget

Max. PoE output power budget 95W for each PoE port
Total PoE Power Budget up to 480 watts maximum (need to use dual power input together)

Power Pin Assignment

1/2, 4/5(+); 3/6, 7/8(-) in default

Lightning protection

The Industrial Switch provides contact discharge of ±8KV DC and air discharge of ±15KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.

Physical Characteristics

Housing

Aluminum case

IP Rating

IP40

Dimensions (LxWxH)

138mmx108mmx49mm

Installation

DIN-Rail or Wall-Mount

Weight

680g

Environmental

Operating Temperature

-40~80 (-40 to 176 )

Operating Humidity

5%~90% (non-condensing)

Storage Temperature

-40~85 (-40 to 185 )

MTBF

250,000@Telcordia(Bellcore)GB

Heat Dissipation

34 BTU/h

Cooling

Passive Cooling, Fanless Design

Noise Level

0 dBA

Software Features

Management Interface

CLI (Console/Telnet (RFC854)), WebUI (HTTPS), SNMPv3

Management

ARP, Flow Control, DDM, DHCP Server/Client, IPv4/IPv6, LLDP, LLDP-MED, UDLD, Port Mirror, RMON, SNMPv1/v2c/v3, Syslog, Telnet,

File Management

Firmware Upgrade/Backup, Dual Images, Configuration Download/Backup, Multiple Configuration, TFTP(RFC783), HTTP, UART

Management Access

Management VLAN, Management ACL (256)

Filter

802.1Q, GMRP, GVRP, IGMP Snooping v1/v2/v3, IGMP Querier V2/V3, QinQ VLAN

Redundant Network

Link Aggregation, STP/RSTP/MSTP/ERPSv2, Auto Edge Port, BPDU Filtering, Self-Loop Detection

Routing Redundancy

VRRP (Interface and IP Address)

VLAN

Support IEEE 802.1Q 4K VLAN, QINQ, Double VLAN, Voice LAN, Surveillance VLAN(Auto/Manual), Multicast VLAN Registration (MVR)

Time Management

Local, SNTP, NTP

Unicast Routing

OSPFv2, RIPv1/v2, Static Route

QOS

Support Queue Scheduling (WRR, WFQ, Strict Priority , Hybrid(WRR+SP or WFQ+SP); Priority Queue(8 queues/port); Class of Service(Port-based, 802.1p, IP TOS Precedence, IP DSCP), Trusted QoS, Rate Limitation

ACL Type

L2/L3/L4, MAC-based, IPv4-based, IPv6-based

Diagnostic Maintenance

Support port mirroring, Syslog, Ping

Security

Broadcast Storm Control, HTTPS/SSLv2v3,TLSv1 RADIUS, TACACS+,AAA SSHv1/v2,Support DHCP Snooping, Option 43/82, 802.1X security access,
Support user hierarchical management, ACL access control list,
Support DOS, port-based MAC filtering/binding, MAC whitelist

MIB

Ethernet-like MIB, MIB-II, MIB-I, Bridge MIB, Bridge MIB extensions, RMON MIB(1,2,3 & 9 groups, RFC2737 Entity, RFC2863 Interface Group, SNMP-Community-MIB

Power Supply

Power Consumption

16 Watts Max (no PoE)

Power Inputs

2

Input Voltage

48-57VDC, Redundant dual inputs

Connector

DC:1 removable 6-contact terminal blocks
Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm

Protection

Overload Current Protection, Reverse Polarity Protection

LED Indicator

PWR

Power status

RUN

System running status

Link/ACT

Data transmission status

RJ45 Port Speed

1000M running status

ALM

Alarm information status

Certification Standard

EMI

FCC Part15 Subpart B Class A,
EN 55022 Class A

EMS

EN61000-4-2(ESD),
EN61000-4-3(RS),
EN61000-4-4(EFT),
EN61000-4-5(Surge),
EN61000-4-6(CS),
EN61000-4-8,
EN61000-4-11

Collision

IEC60068-2-27

Drop

IEC60068-2-32

Vibration

IEC60068-2-6

Safety grade

EN60950-1

  • Download FileName:UF-MIES4X8GP90 Industrial 8G+4x10G SFP+ Managed 95W PoE Switch Datasheet V1.0.pdf Size: 784KB

Model

Description

UF-MIES4X8GP90-SFP

L3 Industrial 8-Port 10/100/1000T 95W 802.3bt PoE + 4-Port 1G/10G SFP+ Managed Ethernet Switch

SFP Options

► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP).

► SFP module is to be purchased separately.

Mounting Options

► Default DIN-Rail Bracket installed; Wall Mount Bracket is included.

Power Options

►480W/10A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block.

► Power Supply is to be purchased separately.

Chat Now
Call Now
Contact
Supplier