Ethernet TransmissionVideo TransmissionSFP TransceiversAccessories
Industrial 2-Port 10/100/1000T 802.3at PoE+ Injector with 12~48VDC Power Input
Model:UF-IPOE-230
► Support 12~48V DC Input and boost to 48V PoE output
► With 2 PoE output Ports, supports IEEE802.3af PoE (15.4W) and IEEE802.3at PoE+(30W)
► Single port support max 60W PoE, total PoE power on 2 ports not exceed 60W
► Support 10/100/1000Base-TX
► Support DIN-Rail & Wall-mount installation
The 2 Ports PoE Injector is a Hardened Gigabit PoE Injector allows you to connect the IEEE 802.3 af/at PoE device such as camera and access point with a non PoE LAN switch within the distance of 100m. Both the Ethernet port (to switch) and the PoE Out port (to PoE device) support 10/100/1000Base-T and are compliant with IEEE 802.3ab. The PoE Out port compliant with IEEE 802.3 af/at. The 2 Ports POE adapter provides an integrated power solution with 12~48VDC wide range voltage input. The Industrial PoE injector use industrial grade components and aluminum housing, it can work at wide range temperature -40°C to 75°C (-40°F to 167°F). It can be used in outdoor harsh environment.
► Support 12~48V DC Input and boost to 48V PoE output
► With 2 PoE output Ports, supports IEEE802.3af PoE (15.4W) and IEEE802.3at PoE+(30W)
► Single port support max 60W PoE, total PoE power on 2 ports not exceed 60W
► Support 10/100/1000Base-TX
► Support DIN-Rail & Wall-mount installation.
► Support 6KV Ethernet ESD protection
► Extensive LED indicators for PoE diagnostics
► Environmentally Hardened -40°C to 80°C (-40°F to 176°F) operating temperature
|
Ethernet |
|
|
Standards: |
IEEE802.3af Power over Ethernet |
|
IEEE802.3at Power over Ethernet |
|
|
Processing Type: |
Forward |
|
Half-duplex, Full-duplex |
|
|
Forward Filter Rate: |
1,488,000pps (1000Mbps) |
|
Cabling: |
10/100/1000Base-T: Cat5 or above |
|
Maximum Distance: |
Cat5 UTP up to 100m |
|
Connector: |
4x RJ45 |
|
Environmental |
|
|
Operating Temperature: |
-40°C to 80°C (-40°F to 176°F) |
|
Storage Temperature: |
-40°C to 85°C (-40°F to 185°F) |
|
Relative Humidity: |
5% to 95% non-condensing |
|
MTBF: |
>200,000hrs |
|
Electrical and Mechanical |
|
|
Input Power: |
12~48VDC (Terminal Block) |
|
Power Consumption: |
65W Max. |
|
PoE (Power over Ethernet) |
|
|
Standard: |
IEEE802.3af/at |
|
Port: |
RJ45 |
|
Power Pin Assignment |
4/5(+), 7/8(-) |
|
Max. Power per Port: |
2 ports for 30W PoE out or 60W PoE for single port |
|
LED Indicators: |
|
|
Power: |
Power Status |
|
PoE: |
PoE Status |
|
Dimensions (WxDxH): |
95 x 70 x 30 mm |
|
Weight: |
0.25Kg |
|
Casing: |
Aluminum Case |
|
Mounting Options: |
DIN-Rail / Wall-mount |
|
Regulatory Approvals |
|
|
ISO9001 |
|
|
FCC part 15, Class A |
|
|
EN55022:2006+A1: 2007 Class A |
|
|
Surge Protection: |
|
|
RJ45: 1KV |
|
|
Power: 500V |
|
|
ESD: 4KV/8KV |
|
- Download FileName：UF-IPOE-230 Industrial 2-Port 30W PoE Injector Datasheet V1.0.pdf Size： 724KB
|
Model |
Description |
|
UF-IPOE-230 |
Industrial 2-port 10/100/1000T 802.3at PoE+ Injector with 12~48VDC Power Input |
|
Mounting Options |
► Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |
|
Power Options |
► Power Supply is to be purchased separately |
