► Up to 95W of PoE Power
► Compliant with IEEE802.3af/at/bt Standard
► Support 10/100/1000Base-T
UF-PJ4895G 95W – 56V 10/100/1000M PoE Injector is a long-distance driving, fast network performing, strong PoE Output IEEE 802.3bt, 802.3at and 802.3af certified midspan. It is a single port indoor PoE injector that can provide up to 95W PoE power. The midspans are ideal to power 802.11 access points, pan-tilt-zoom (PTZ) and dome cameras, IP video phones and other power Ethernet end terminals with 95W of power. With plug and-play installation, they are easy and cost effective to implement leveraging existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
► Up to 95W of PoE Power
► Compliant with IEEE802.3af/at/bt Standard
► Support 10/100/1000Base-T
► Compliant with Limited Power Source (LPS)
► High Efficiency > 85%
► Low No Load Power Consumption < 0.5W
► Provide 2 LED indicators include Power LED(Green) and PoE LED(Orange)
► Over-Voltage/Load/Temperature & Short Circuit protections
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non-standard Ethernet Terminals
► Injects 56V DC through a CAT 5 cable, use all 4 pairs into remote devices such as wireless AP, IP phone, web camera and other functions
Ethernet |
|
Standards: |
IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet |
|
IEEE 802.3ab 1000Base-T Gigabit Ethernet |
|
Processing Type: |
Forward |
Half-duplex, Full-duplex |
|
Forward Filter Rate: |
1,488,000pps (1000Mbps) |
Cabling: |
10/100/1000Base-T: Cat5 or above |
Maximum Distance: |
High Power PoE (95W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328ft) 802.3af / at PoE (15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
Connector: |
LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320 C13 |
Environmental |
|
Operating Temperature: |
-10°C to 50°C (14°F to 122°F) |
Storage Temperature: |
-20°C to 70°C (-4°F to 158°F) |
Relative Humidity: |
5% to 95% non-condensing |
MTBF: |
>200,000hrs |
Electrical and Mechanical |
|
Input Voltage Range: |
100-240V AC @50/60Hz, 1.5A max. |
Output Voltage: |
DC 48-57V, 2A |
Power Consumption: |
120 watts max. |
PoE (Power over Ethernet) |
|
Standard: |
IEEE 802.3af |
IEEE 802.3at |
|
IEEE 802.3bt |
|
Port: |
RJ45 |
Power Pin Assignment |
Pin 1,2 / 4,5 (+), Pin 3,6 / 7,8 (-) |
PoE Power Output |
DC 48V-57V/95-watt PoE via 2-pairs |
LED Indicators |
|
Power: |
Power Status |
Port: |
PoE Status |
Dimensions (W×D×H): |
147 x 62 x 30mm |
Weight: |
0.45Kg |
Casing: |
Plastic Case |
Mounting Options: |
Desktop/Wall-mount |
Regulatory Approvals |
|
ISO9001 |
|
FCC part 15, Class A |
|
EN55022:2006+A1: 2007 Class A |
|
Surge Protection: |
|
RJ45: 1KV |
|
Power: 500W |
|
ESD: 4KV/8KV |
Model |
Description |
UF-PJ4895G |
Single-Port 10/100/1000M 95W 802.3bt PoE++ Injector with power cord |
Mounting Options |
► Desktop or Wall-mount installation |
Power Options |
► 100-240V voltage input |