Hardware Specification

Standards:

IEEE802.3 10Base-T Ethernet

IEEE802.3u 100Base-TX/FX Fast Ethernet

IEEE802.3ab 1000Base-T

IEEE 802.1d Spanning tree protocol

IEEE 802.1w Rapid Spanning tree protocol

IEEE 802.1s Multiple Spanning tree protocol

IEEE 802.1p Class of service

IEEE 802.1Q VLAN Tagging

IEEE 802.1AB-2005, LLDP

IEEE 802.1Qbb priority flow control

IEEE 802.3x Flow Control and Back pressure

IEEE802.3z 1000Base-SX/LX Gigabit Ethernet

IEEE802.3ae 10GBase-X

IEEE802.1ax Link Aggregation

IEEE802.1ak - Multiple Registration Protocol

10GBase-X SFP+ Slots:

12 x 10GBase-X SFP+ interfaces, from port 1 to port 12

Ethernet Port:

8 x 10/100/1000Base-T RJ45

Console Port:

1 x RJ45-to-DB9 serial port (9600, 8, N, 1)

Switching Fabric:

Up to 258Gbps

Packet Forwarding Rate

192Mpps

VLAN ID

4K

Flash Capacity

8MB

Memory Capacity

512MB DDR3 SDRAM

CPU

600 MHz ARM Cortex-A9 single-core processor

Packet Buffer

2MB

Jumbo Frames

12k bytes

Transfer Mode

Support store-forward mode and cut-through mode

IPv4/IPv6 route

512/256

MAC Address Table

16K

Network Cables:

10/100/1000BASE-T:

 1G--Cat 5e/Cat 6/Cat 6A/ Cat 7

 100M--Cat 5/Cat 5e/Cat 6/Cat 6A/ Cat 7

 Cat 5/5e/6/6A/7 UTP cable (100 meters, max.)

 EIA/TIA-568 100-ohm STP (100 meters, max.)

10GBASE-LR/SR/BX:

 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m

 9/125μm single-mode fiber optic cable, up to 20/40/80km (vary on SFP module)

Management

System Management

SNMP v1/v2/v3

Console Management

TELNET Method

WEB Interface

Spanning Tree:

Support STP, RSTP, MSTP (802.1s)

VLAN

Support port-based VLAN

Support MAC based VLAN

Support 802.1Q tag VLAN

Support IP based VLAN

Flow Control

Half-Duplex Is Based On Back Pressure Control

Full Duplex Based On PAUSE Frame

Storm Control

Broadcast Suppression

Multicast Suppression

DLF Inhibition

Inhibition Rate

Security Features

IP+MAC+PORT+VLAN Binding

ARP Inspection

DOS Protection

Port Protection

IP Source Port Protection

VLAN

Port Based VLAN

802.1Q VLAN

IP based VLAN

MAC based VLAN

MAC Address Table

Static MAC address table

Dynamic MAC address table

Port Mirroring

Support Port Mirroring

Port Management

General Settings

Port Statistics

Configure Port

Port Aggregation

Port Isolation

QoS

IEEE 802.1Qau Congestion Mechanism

8 Sending Queues Per Port Are Mapped To 8 Priority Levels of 802.1p

IP Service

Ping Detection

DHCP Detection

Multicast Management

IGMP Snooping frame

Remote Upgrade

Support for Version Upgrade via Web

Support Local Version Upgrade

Excellent Performance

★ With 258Gbps backplane bandwidth, the industry's highest performance (1U TOR);

★ Hardware routing, wire-speed layer 3 switching packet forwarding rate reaches 192Mpps, L2/L3 full wire-speed forwarding;

★ It can be deployed in the core of the metropolitan area network provides several last 1km technologies

Safe Reliable:

★ Provide defenses such as DOS, distributed denial of service, deception, viruses

★ Support IEEE802.1x, provide port-based user authentication, network shield technology, security control technology policy control list

★ Limit the maximum number of hosts connected to the port, multi-channel binding of Ethernet interfaces to increase bandwidth system redundancy

★ Powerful ACL, supporting L2-L4 Layer Data Filtering

★ Strategy control list, flow adjustment

Easy to Maintain:

★ Support flexible port configuration

★ It can be managed through various methods such as Web, SNMP, CLI, Telnet, Etc.

★ Support XModem protocol, software upgrade BootRom Upgrade can be done through TFTP/ZMODEM

★ Support SFP+, but also backward compatible with XFP, Etc.

★ Enter or exit low power consumption state in PHY.

Powerful Flow Broadcast Management Functions

★ Automatically detect suppress broadcast storms, support IGMP message detection, effectively limit the flooding of broadcast messages

★ Support flow control in full-duplex mode half-duplex mode

★ Support the rate limit of the Ethernet Interface with 1M as the step length

★ Support IP Multicast QoS

Environmental

Operating Temperature:

-10°C to 60°C (14°F to 140°F)

Storage Temperature:

-40°C to 80°C (-40°F to 176°F)

Relative Humidity:

5% to 95% non-condensing

Storage Humidity:

5% to 95% non-condensing

Electrical and Mechanical

Input Power:

110-260VAC

Power Consumption:

100W

LED Indicators

PWR:

Power Status

SYS:

System Activity

NC:

Connection/Receiving

Dimensions (WxDxH):

440 x 285 x 44mm

Weight:

5KG

Casing:

Metal Case

Mounting Options:

Rack Mount

Regulatory Approvals

CE, RoHS, FCC

Model

Description

UF-FS12X8G

L2+ Managed 12-Port 10G SFP+ + 8-Port 10/100/1000T Optical Fiber Switch

SFP+

10GBase-X SFP+ (to be purchased separately)

Please select your SFP+ on our SFP Modules page for details.

Mounting Options:

► Rack Mount

Power Options:

► 110-260VAC