Ethernet TransmissionVideo TransmissionSFP TransceiversAccessories
10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Ethernet Media Converter
Model:UF-MC10G Series
► 1x 100M/1G/2.5G/5G/10GBase-T to 1x 10GBase-X SFP+ Slot
► Support 16K jumbo frame size
► Plug and Play installation
The Unmanaged 10Gigabit Ethernet Media Converter extends communication distance with high performance of data transmission via fiber optic cable. It is designed for use in network environments where the ultra-high bandwidth provided by 10Gigabit Ethernet is required, for example, data center cloud computing, enterprise backbone, campus networks and carrier infrastructure. The media converters are compatible with a wide range of 10G transceiver modules, such as general 10GBase SFP+ transceiver modules, BIDI transceiver modules, CWDM transceiver modules, etc. Be sure that the wavelength, speed rate, and the distance of the transceiver modules used at the both ends of the media converter are consistent.
► 1x 100M/1G/2.5G/5G/10GBase-T to 1x 10GBase-X SFP+ Slot
► Support 16K jumbo frame size
► Supports auto-negotiation and 100Mbps half/full duplex and 1/2.5/5/10Gbps full duplex mode
► Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
► External 5V DC, 2A power supply
► 100 meters over Cat 6A / Cat7 at 10Gbps
► 0 to 50 degrees C operating temperature
► Co-works with UF’s 14-Slot Media Converter Chassis
► Plug and Play installation
|
Ethernet |
|
|
Standards: |
IEEE802.3u 100Base-TX |
|
IEEE802.3ab 1000Base-T |
|
|
IEEE 802.3bz 2.5G/5GBASE-T |
|
|
IEEE 802.3an 10GBASE-T |
|
|
IEEE 802.3ae 10Gbps Ethernet |
|
|
IEEE 802.3x full-duplex flow control |
|
|
Flow Control: |
Back pressure for half duplex |
|
IEEE 802.3x pause frame for full duplex |
|
|
Fabric: |
20Gbps |
|
Address Table: |
9K entries, automatic source address learning and aging |
|
Jumbo Frame: |
16K |
|
Network Cables: |
10G/5G/2.5G/1G/100M BASE-T: 10G--Cat 6A/Cat 7 5G--Cat 6/Cat 6A/Cat 7 1G/2.5G--Cat 5e/Cat 6/Cat 6A/ Cat 7 100M--Cat 5/Cat 5e/Cat 6/Cat 6A/ Cat 7 Cat 5/5e/6/6A/7 UTP cable (100 meters, max.) EIA/TIA-568 100-ohm STP (100 meters, max.) 10GBASE-LR/SR/BX: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m 9/125μm single-mode fiber optic cable, up to 60km |
|
Connector: |
1x 100M/1G/2.5G/5G/10GBase-T RJ45 |
|
Optical Port: |
1x 10GBase-X SFP+ |
|
Environmental |
|
|
Operating Temperature: |
0°C to 55°C (32°F to 131°F) |
|
Storage Temperature: |
-10°C to 70°C (14°F to 158°F) |
|
Relative Humidity: |
5% to 95% non-condensing |
|
Storage Humidity: |
5% to 95% non-condensing |
|
Electrical and Mechanical |
|
|
Input Power: |
5V DC, 2A max. |
|
Power Consumption: |
3.75W |
|
LED Indicators |
|
|
PWR: |
Power Status |
|
10G: |
10Gbps Speed Rate |
|
FX Link/Act: |
Fiber Link Status |
|
SD: |
Fiber Signal is detected |
|
TX Link/Act: |
Ethernet Link Status |
|
Dimensions (WxDxH): |
94 x 70 x 26mm (1.02''x 2.76''x 3.7'') |
|
Weight: |
180g (device only) |
|
Casing: |
Compact-sized metal case |
|
Mounting Options: |
Desktop, wall mountable Media converter Chassis installation |
|
Regulatory Approvals |
|
|
CE, RoHS, FCC |
|
- Download FileName：UF-MC10G Media Converter Datasheet V1.0.pdf Size： 711KB
|
Model |
Description |
|
UF-MC10G |
10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter |
|
SFP |
10G SFP+ (to be purchased separately) Please select your SFP on our SFP Modules page for details. |
|
Mounting Options: |
► Desktop, wall mountable ►Media converter Chassis installation |
|
Power Options: |
► 2A 5VDC Power Supply |
